Filter
Top Products
10
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Installing or removing bit
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before installing or
removing the bit.
Loosen the thumb screws which secure the casing. Pull out
the casing in the direction of the arrow.
Press the dust cover toward the plain bearing and pull out
the bit. If the dust cover cannot be moved as far as the plain
bearing, try it again after turning the bit slightly.
To install the bit, insert it into the socket while turning it
slightly. After installing, always make sure that the bit is
securely held in place by trying to pull it out.
1. Casing
2. Thumb screws
001878
1
2
1. Bit
2. Dust cover
3. Plane bearing
001879
1 2 3