Filter
Top Products
Installing side grip (auxiliary handle)
Screw the
side
grip on the tool securely.
The
side
grip can be installed on either
side
of
the tool, whichever
is
convenient.
Installing or removing abrasive
disc
CAUTION
:
Always be sure that the tool
is
switched
off
and unplugged before installing or removing
the disc.
NOTE
:
Use sander accessories specified in this manual. These must be purchased
by
separate.
Mount the rubber pad onto the spindle. Fit
the disc on over the rubber pad and screw
the lock nut onto the spindle.
Abrasive
disc
To
remove the disc,
follow
the installation procedure in reverse
5