Filter
Top Products
P 11/ 13
Fig. 29
Wiring diagram
Switch
Terminal
Receptacles
Terminal
Lead wire (black)
Lead wire (red)
Install Receptacles on
Terminal as illustrated
to right.
Buzzer
circuit
groove
Put the lead wires from
Controller to Buzzer on
the groove in Controller.
Put Connector and the lead
wires from Controller to
Buzzer between the ribs
on Controller.
Place Connectors and the sag
of lead wires in the space
between ribs (A)- (B)- (C)
and pins- rib (D)- boss.
Controller
Route the lead wires (orange,
white, blue) from Controller
to Stator between the two pins.
Connector
Connector
rib
boss
rib (D)
pin
rib (C)
rib (B)
rib (A)
Route the lead wires from
Switch unit (for Trigger)
between rib (B) and rib (C).
Route the lead wires from
Switch unit (for rotation
reverse) between rib (A)
and rib (C).
[1] Wiring Around Controller