Filter
Top Products
P 9 / 13
[3] -7. Disassembling/ Assembling of Switch Section (cont.)
ASSEMBLING
Put Leaf spring in place on F/R Change lever, and Compression
spring 4 on Switch lever (A).
Put F/R Change lever, Switch lever and Switch unit for rotation
reverse in place. At this time, fit the protrusion on F/R Change
lever in Switch lever (A). (Fig. 27)
Then, while pushing these parts with Cover, fasten with PT3x16
Tapping screw.
Fig. 28
protrusion on F/R Change lever
Switch lever (A)