Filter
Top Products
12
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
• When not operating the tool, always set the reversing
switch lever to the neutral position.
The remaining Battery capacity
Auto-stop mechanism
The tool stops automatically (Red color lamp lights on) after
the battery capacity reaches under 20% to prevent the lack
of fastening torque. Charge the battery or use a new fully
charged one.
Auto-stop setting for number of impacts
This tool has a convenient auto-stop mechanism that allows
you to preset the desired number of impacts in terms of the
application. The tool then stops automatically after reaching
the preset number of impacts.
1. Pulling the trigger, insert the battery cartridge. Keep on
pulling the trigger after inserting the battery cartridge.
(The indicating lamp on the back of the tool will flash
about 10 times, then the lamp will keep lighting up lit.)
2. Hit the tool housing around the grip once with a screw-
driver etc. (The indicating lamp will go out.)
(C) E F
EF
001258
1. Indicating lamp
2. Switch trigger
3. Battery cartridge
2
3
1
ON
001259
1. Tool housing
2. Screwdriver
1
2
001260