Filter
Top Products
13
3. Release the trigger. (The indicating lamp will keep light-
ing up lit for 0.5 seconds, then the lamp will go out.)
4. Hit the tool housing preset number of first digit except 0.
(The indicating lamp will light up in green color. Then,
the light goes out.)
Example:
• When the preset number is 12, hit the tool
housing once.
5. Pull the trigger, then release it.
6. Hit the tool housing preset number of second digit
except 0. (The indicating lamp will light up in red color.
Then, the light goes out.)
Example:
• When the preset number is 12, hit the tool
housing two times.
7. Pull the trigger, then release the trigger. (The indicating
lamp will light up.)
8. Remove the battery cartridge. (Presetting has finished.)
(The indicating lamp will go out.)
CAUTION:
• When you change the presetting, do the same
procedure as above 1 - 8.
Confirming the presetting
Switch off the tool and insert the battery cartridge. The indi-
cating lamp will indicate the presetting number. Green lamp
shows the first digit. Red lamp shows the second digit.
Example:
• presetting number is 12.
1. Green color lamp flashes once.
2. Red color lamp flashes two times.
3. The lamp goes out.
OFF
001261