Filter
Top Products
To install the blade, mount
it
carefully onto the spindle, making sure that the direction
of
the arrow on the surface of the blade matches the direction
of
the arrow on the blade
case. Install the outer flange and hex bolt, and then use the socket wrench to tighten the
hex bolt (left-handed) securely counterclockwise while pressing the shaft lock.
Return the safety cover and center cover to
its original position. Then tighten the hex
bolt clockwise to secure the center cover.
Release the handle from the raised posi-
tion by pulling the stopper pin. Lower the
handle to make sure that the safety cover
moves properly.
Safety
cover
When lowering the handle, the safety
cover rises automatically. The cover returns
to its original position when the cut is com-
pleted and the handle is raised. NEVER
DEFEAT
OR
REMOVE
THE
SAFETY
COVER. In the interest of your personal
safety, always maintain the safety cover in
good condition. Any irregular operation of
the safety cover should be corrected imme
diately. NEVER
USE
THE
TOOL
WITH A
FAULTY SAFETY COVER. If the see-
-
Blade case
Socket wrench
through safety cover becomes dirty, or sawdust adheres to
it
in such a way that the blade
and/or workpiece is no longer easily visible, remove the battery cartridge and clean the
cover carefully with
a
damp cloth.
Do
not use solvents or any petroleum-based cleaners
on the plastic cover.
12