Filter
Top Products
16.
REDUCE THE
RISK
OF
UNINTENTIONAL STARTING. Make sure switch is
in
off position before inserting battery.
17.
USE RECOMMENDED ACCESSORIES. Consult the owner's manual for
recommended accessories. The use of improper accessories may cause risk
of
injury to persons.
18.
NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or
if the cutting tool
is
accidentally contacted.
19.
CHECK DAMAGED PARTS. Before further use of the tool, a guard or other
part
that
is damaged should be carefully checked to determine that
it
will
operate properly and perform its intended function
-
check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
20.
DIRECTION OF FEED. Feed work into a blade or cutter against the direction
of rotation of the blade or cutter
only.
21.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't
leave tool until
it
comes to a complete stop.
4