Filter
Top Products
CAUTION
:
0Your new battery cartridge
is
not charged. You will need to charge
it
before use.
0
Do
not keep the button pressed in with tape,
etc.
or the circuit will not function pro-
perly.
Also,
a
malfunction of the charger may result possibly causing overheating, etc.
0
If
you
try to charge
a
cartridge from
a
just-operated tool, sometimes the charging light
will not come on.
If
this occurs,
let
the cartridge cool off for
a
while. Then re-insert
it
and try to charge
it
once more.
0
When you charge
a
new battery cartridge or
a
battery cartridge which has not been used
for
a
long period,
it
may not accept
a
full charge. This
is
a
normal condition and does
not indicate
a
problem. You can recharge the battery cartridge fully after discharging
it
almost completely
a
couple
of
times.
0
If you wish to charge two battery cartridges, allow
15
minutes between chargings on the
fast charger.
Safety
system
Make sure
all
safety systems are in working
order before operation. The tool must not
operate if only the trigger
is
pulled or if
only the safety lever
is
pressed against the
wood.
It
must work only when both ac-
tions are performed. Test for possible
faulty operation with
a
tool unloaded and
pointed well away from yourself or any
bystanders.
Trigger
Safety
lever
NOTE
:
There
is
a
possibility that the tool may operate for an instant when only the trigger
is
pulled. This does not indicate
a
problem. If this occurs, point the tool well away from
yourself or any bystanders.
Release
and pull the trigger again to make sure the safety
systems are in working order.
8