Filter
Top Products
Refer to pages 28, 31, 32 before using template
Page 29
Additional Templates Available on Website
Makita 3612 B
Router table fence reference line
Router mounting holes
Use this 6" scale to check accuracy when copied
Drill .500" hole
through router
table insert plate
install #30 dust cover insert
into .500" hole and press flush
with top of insert plate
Router Raizer Access Hole
Makita 3612 B
NOTE: This hole must be drilled 1/2" or .500"
for #30 dust cover insert to fit properly.
NOTE: This router requires a 3/4" pocket or use of 8" X 8"
black rubber spacer for router table installation. Pages 4,5,6.
Note: Cross lines for locating and drilling holes are accurate. The illustration of subbase may vary
slightly in size and design, but is accurate enough for cutting the rubber spacer if required.
Router Raizer Access Hole
3/4" reference circle for drilling the
routers original subbase only. Table
mounted, drill 1/2" hole in table top.
.500" reference circle
for drilling table top or
insert plate.
1/2" = .500
© 2000-2005 Router Technologies
All Rights Reserved