Filter
Top Products
Connection cable
The mains connection cable is wound
round a hook underneath the ironing
table.
^ Unwind the cable.
Do not insert the plug into the
electrical socket yet.
N.B. The plug shown is for illustration
only.
Dust cover
The dust cover which protects the roller
during transit has to be removed.
^ First remove the feed-in table by
lifting it out of the right hand holder,
then pull it out to the left of the roller.
Then plug the appliance in and
switch it on. The heater plate will
then rise automatically.
^
The protective dust cover can now
be pulled out and off.
Before using for the first time
10