Filter
Top Products
To avoid the risk of accidents and
damage to the ironer please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, use and maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
Correct application
~
This ironer must only be used for
ironing articles which were washed in
water and which have a care label
stating that the article is suitable for
machine ironing.
~
This ironer is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience or
knowledge, unless they are supervised
whilst using it or have been shown how
to use it correctly by a person
responsible for their safety.
Technical and electrical safety
~
Before setting up the ironer, check it
for any externally visible damage.
Under no circumstances should you
use it if it has been damaged. A
damaged appliance may be
dangerous.
~
If the supply cord is damaged, it
must be replaced by a Miele approved
service technician to avoid a hazard.
~
Before connecting the ironer, ensure
that the connection data on the data
plate (fuse rating, voltage and
connected load) match the mains
electricity supply. If in any doubt,
consult a qualified electrician.
~
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system which complies with local and
national safety regulations.
Where there is any doubt, the on-site
electrical wiring should be inspected by
a qualified electrician. The
manufacturer cannot be held liable for
damage or injury caused by an
inadequate earthing system (e.g.
electric shock).
~
Do not connect the ironer to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
Warning and safety instructions
4