Filter
Top Products
,
Repairs to the gas and electrical components of this
appliance must only be carried out by a suitably qualified
and competent person to ensure safety (Gas Safe
registered in the UK). Repairs and other work by
unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
What to do if ...
... the burner does not ignite after several attempts.
Check whether
– the burner is assembled correctly.
– the gas supply tap is turned on.
– the burner is dry and clean.
– the flame slits are dry and unblocked.
– the mains fuse has tripped. If it has, contact a qualified
electrician or the Miele Service Department. The gas can
be lit with a match. (See “Use during a power cut”).
... the gas flame goes out after being lit.
The flames need to touch the ignition safety device so that it
heats up sufficiently.
If the flames do not touch the ignition safety device, check
that
–
the burner components are assembled correctly.
–
there is no soiling on the ignition safety device. If there is,
remove it carefully (see "Cleaning and care").
Problem solving guide
29