Filter
Top Products
OM-659 Page 2
ST-148 258
Inches Millimeters
A 20 508
B 13 330
C 48-1/2 1232
D 74 1879
E* 158-1/2 4026
*150 in (3810 mm) Without
Optional Hitch
A
B
C
D
E
Dimensions A and B will decrease
when weight is added to trailer.
Figure 2-1. Overall Dimensions
SECTION 3 – INSTALLATION & OPERATION
All directions are given as facing the towing vehicle. The word “front” means the
hitch end of the trailer.
NOTE
3-1. Operating Parking Brake And Jack
WARNING
TILTING OF TRAILER can result in personal injury or equipment damage.
• Use adequate blocks or lifting device to support hitch end while pivoting trailer jack into position.
• Use trailer jack to obtain desired height and to support tongue weight.
rwarn1.1* 3/93
Ref. ST-148 258
1 Parking Brake
Use brake to manually apply trailer
brakes when trailer is parked.
To use brake, push handle forward
until handle is nearly horizontal.
To release brake, pull handle back
to vertical position.
See Section 3-7 for parking brake
adjustment procedure.
2 Jack
3 Securing Pin
Pull pin and rotate jack to vertical
position. Insert pin to lock jack in
place.
4 Handle
Turn handle to raise or lower trailer.
When jack is not needed, pull pin
and rotate jack to horizontal posi-
tion. Use pin to lock jack in place.
1
2
34
Figure 3-1. Operating Parking Brake And Jack