Filter
Top Products
Runner Cart
#300 244
Designed to accom -
modate the Dynasty
®
or Maxstar
®
350 or
700 power sources
and the Coolmate
™
3.5 Cooler. Cart
features: single
cylinder rack,
foot pedal holder,
(3) cable/torch
holders, (2) TIG electrode filler holders
and a convenient drawer for tungsten and
consumable storage.
Coolmate
™
3.5
#300 245
Designed to integrate
with the Dynasty
®
and Maxstar
®
350
and 700 power
sources. For use with water-cooled torches
rated up to 600 amps. 3.5 gallon capacity.
TIG Coolant #043 810
Sold in multiples of 4. Pre-mixed low-
conductivity Miller coolant contains ethylene
glycol and deionized water to protect from
freezing and boiling -37˚ to 227˚F (-38˚ to
108˚C). 1-gallon plastic recyclable bottles.
Water-Cooled
Dinse #195 377
For Dynasty and
Maxstar
®
350.
Used to adapt WP20, WP18, and CS310 to
dinse-style connector.
Order from Miller Parts.
Water-Cooled Thread Lock
#225 028
For Dynasty and Maxstar 700.
Used with (WP125, WP24W,
WP25, WP20, WP18, WP12,
CS310, CS410, WP22, WP27)
water-cooled torch.
Order from Miller Parts.
TIG Welding Gloves
#227 813 Small #227 815 Large
#227 814 Medium #227 816 X-Large
Made from soft grain goatskin. Sewn with
Kevlar
®
thread.
Order from Miller Parts.
Automation Interface Kit #300 549
Field Includes automation PC board, 28-pin
socket receptacle with harness, 28-pin plug
connector. Provides required and advanced
automation controls.
Weld Current Sensor #195 516
Detects when work clamp is not connected
and prevents expensive damage to
disconnect devices and input power cord
and wiring.
Educational Materials
To order these items, distributors can call
the Miller Literature Distribution Center at
1-920-735-4356, or FAX 1-920-735-4011.
Gas Tungsten Arc (TIG) Welding Book
#170 555
CD-ROM #233 558
Simulator and setup video (included with
machine).
Tungsten
Tungsten is 7 in length and available in pkgs of 10.
Order from Miller Parts.
2% Ceriated (orange) for AC/DC applications
#WC040X7 .040 in, 10– 80 A
#WC116X7 1/16 in, 70– 150 A
#WC332X7 3/32 in, 140– 250 A
#WC018X7 1/8 in, 225–400 A
#WC532X7 5/32 in, 300–500 A
1.5% Lanthanum (gold) for AC/DC applications
#WL040X7 .040 in, 10– 80 A
#WL116X7 1/16 in, 70– 150 A
#WL332X7 3/32 in, 140– 250 A
#WL018X7 1/8 in, 225–400 A
#WL532X7 5/32 in, 300–500 A
Remote Controls and Switches
RCCS-14 Remote
Contactor and Current
Control #043 688
14-pin plug. North/south rotary-motion
fingertip control fastens to TIG torch using
two Velcro
®
straps. Includes 26.5 ft (8 m)
control cord.
RFCS-14 HD Foot
Control #194 744
Maximum flexibility is
accomplished with a
reconfigurable cord that
can exit the front, back or either side of the
pedal. Foot pedal provides remote current
and contactor control. Includes 20 ft (6 m)
cord and 14-pin plug.
RHC-14 Hand Control #129 340
Miniature hand control for remote current
and contactor control. Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 83 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RMLS-14 Switch
#129 337
Momentary-
and maintained-contact rocker switch for
contactor control. Push forward for
maintained contact and backward for
momentary contact. Includes 26.5 ft (8 m)
cord and 14-pin plug.
RMS-14
On/Off Control
#187 208
Momentary-contact switch for contactor
control. Rubber-covered pushbutton dome
switch ideal for repetitive on-off
applications. Includes 26.5 ft (8 m) cord
and 14-pin plug.
Extension Cords for 14-Pin Remote Controls
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (23 m)
Genuine Miller Accessories
Torch Kits
250 A Water-Cooled Torch Kit #300 185
25 ft (7.6 m) Weldcraft
®
WP20 torch
Torch cable cover
AK4C torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(1/16, 3/32 and 1/8 in)
Smith
®
regulator/flowmeter HM2051A-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled Dinse torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp
(work or ground lead) and Dinse connector
300 A Water-Cooled Torch Kit #300 183
Recommended for Dynasty 350
25 ft (7.6 m) Weldcraft
®
CS310 torch
Torch cable cover
CS310AKC torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(1/16, 3/32 and 1/8 in)
Smith
®
regulator/flowmeter HM2051A-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled Dinse torch adapter
15 ft (4.6 m) 1/0 weld lead with clamp
(work or ground lead) and Dinse connector
400 A Water-Cooled Torch Kit #300 186
Recommended for Dynasty 700
25 ft (7.6 m) Weldcraft
®
WP18SC torch
Torch cable cover
AK18C torch accessory kit includes
shielding cups, collets, collet bodies
and 2% cerium tungsten electrodes
(3/32, 1/8 and 5/32 in)
Smith
®
regulator/flowmeter H1954D-580
12 ft (3.7 m) rubber gas hose (regulator
to machine)
Water-cooled thread lock torch adapters
12 ft (3.7 m) 4/0 weld lead with clamp
(work or ground lead)
7