Miller Electric Big Blue 452P Welding System User Manual


 
OM-496 Page 42
Return To Table Of Contents
9-2. Routine Maintenance
The engine oil/filter and fuel injector maintenance intervals are different for the Perkins
404.22 and 3.152 engines (see maintenance schedule following).
Note
Follow the storage procedure in the engine owner’s manual if the unit will not be used for an
extended period.
Note
Recycle engine
fluids.
Y Stop engine before maintaining.
. See Engine Manual and Maintenance
Label for important start-up, service,
and storage information. Service unit
more often if used in severe conditions.
* To be done by Factory Authorized
Service Agent.
Every 8 h
Check Fluid
Levels. See
Section 5-7.
Wipe
Up
Spills.
Drain Water
From Fuel
System.
OIL
Full
FUEL
WATER
Coolant
Full
Every 50 h
Clean Air Filter.
See Section 9-3.
Clean And
Tighten
Weld
Terminals.
Every 100 h
Clean And
Tighten
Battery
Connections.
Check air cleaner
hoses for cracks
and loose clamps.
Every 250 h
Change Oil. See
Section 9-7.
Change Oil Filter.
See Section 9-7.
Replace
Unreadable
Labels.
Check And
Clean Spark
Arrestor. See
Section 9-4.
Every 500 h
Repair Or
Replace
Damaged
Cables.
1/2 in.
(13 mm)
Check Belt
Tension.