Filter
Top Products
OM-498 Page 13
Return To Table Of Contents
SECTION 5 − INSTALLATION
5-1. Installing Welding Generator
install1 5/02 − 802 512-A / Ref. 151 556 / 158 936-A / 800 652-A / S-0854
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
18 in
(460 mm)
OR
Movement Airflow Clearance
Location
5-2. Grounding Generator To Truck Or Trailer Frame
install1 5/02* − Ref. 151 556 / S-0854
Y Always ground generator
frame to vehicle frame to pre-
vent electric shock and static
electricity hazards.
1 Metal Vehicle Frame
2 Equipment Grounding
Terminal
3 Grounding Cable
Use #10 AWG or larger insulated
copper wire.
Y If unit does not have GFCI
receptacles, use GFCI-
protected extension cord.
Electrically bond generator frame
to vehicle frame by metal-to-metal
contact.
GND/PE
2
3
1