Miller Electric Bobcat 225 Welding System User Manual


 
. A complete Parts List is available at www.MillerWelds.com
OM-4434 Page 14
4-4. Fuel Consumption (Robin-Powered Units)
220 571
On a typical job using 1/8 in 7018
electrodes (125 amps, 20% duty
cycle), expect about 20 hours of op-
eration.
Welding at 150 amps at 40% duty
cycle uses approximately 3/4 gal-
lon per hour, or about 16 hours of
operation.
4-5. Fuel Consumption (Kohler-Powered Units)
179 939
On a typical job using 1/8 in 7018
electrodes (125 amps, 20% duty
cycle), expect about 20 hours of op-
eration.
Welding at 150 amps at 40% duty
cycle uses approximately 3/4 gal-
lon per hour, or about 16 hours of
operation.