Filter
Top Products
2
MANTA I
Revision 03/05, Effective Date March 2, 2005
3
MANTA I
Revision 03/05, Effective Date March 2, 2005
For your Safety!
These safety precautions should be followed at all times. Failure to follow these
safety precautions could result in injury to yourself and others. Safety is a
combination of operator common sense and alertness at all times when this drill
rig is being used.
For your own safety and protection, do not attempt to operate the drill until it is
completely assembled and installed according to the instructions, and until you
read and understand all safety and operating instructions.
Take time to read and understand fully the owners manual and all safety labels
attached to the core drill.
Use safety equipment. Everyone in the work area should wear safety goggles
or glasses with side shields complying with current safety standards. Wear
hearing protection during extended use and a dust mask for dusty operations.
Hard hats, face shields, safety shoes, etc. should be used when specified or
necessary.
Use the right tool. Do not use a tool or attachment to do a job for which it is not
recommended. Do not alter the tool.
Keep your work area clean and safe to avoid accidents. Maintain a safe zone
and keep all visitors at a safe distance from the work area.
Always insure that the switch is off before plugging unit into electrical power.
Never leave the drill running unattended. Turn power off.
Do not over reach, maintain control. Keep proper footing and balance at all
times. Maintain a firm grip. Use extra care when using the tool on ladders,
roofs, scaffolds, etc.
Maintain all tools with care for the safest and best performance.
Should any part of this drill become missing or damaged, or any component fail
to perform properly, shut off the drill and unplug the power source. Replace the
missing, damaged, and/or failed part before resuming operations.
Always keep alert. Do not allow familiarity (gained from frequent use) to cause
a careless mistake. Always remember that a careless fraction of a second is
sufficient to inflict serious injury.
Think Safety The operation of any power tool can result in foreign objects
being thrown into the eyes causing severe damage. Use safety goggles to
comply with ANSI Z87.1.
FORESIGHT IS BETTER THAN NO SIGHT
General Safety Instructions for the MK-Manta I Core Drill
(
(
)
)
on
(
(
)
)
on