Filter
Top Products
MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05) — PAGE 19
MRH-800DS — HANDLE BAR/LEVER COMPONENTS
HANDLE BAR/LEVER COMPONENTS
Figure 4 illustrates the location of the major lever
components on the handle bar of the machine. Each
component is described below:
1. Travel Lever – Controls the direction of travel of the
machine (forward and reverse).
2. Horn Button – When pressed, gives a warning sound of
the machine approaching.
3. Vibration Lever – Turns vibration on and off.
4. Throttle Lever – Controls the start up of the machine.
5. Dead-Man Device – When pressed or hit while traveling
in reverse, causes the travel lever to return to neutral
position to stop the machine.
6. Light ON/OFF Switch - Turns headlight on and off.
7. Starter Switch - Engine starts when key is turned to the
RUN position