Multiquip MRH-800DS Power Roller User Manual


 
MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05) — PAGE 25
Recoil Start
1. Move the throttle lever to the RUN position.
2. Open the fuel cock by turning it clockwise to the down
position (Figure 16).
Figure 17. Engine Start Handle
3. Pull the starting handle slowly until you feel some
resistance (Figure 17). Return handle to original
position.
Figure 16. Open Fuel Cock
Fuel Cock
(Open
Position)
4. Push down the decompression lever (Figure 18).
Figure 19. Engine Start Handle
When starting with a motor
starter, a decompressor is
not normally required.
However, when ambient
temperature or battery
charger level is low, use of
a decompressor will help
make the start-up easier.
5. Pull the starting handle hard and fast to start engine
(Figure 19).
Figure 18. Decompression Lever
6. If the engine does not start, repeat steps
3 through 5.
Pull
Handle To
Start
NOTE
MRH-800DS— INITIAL STARTUP