Multiquip Sp-6065 Saw User Manual


 
26
Blade Guard Water Supply
Verify that the water hose on the saw is connected to the Blade Guard and that
the water pipes are pointed into both Blade Collars.
CAUTION
Make sure that the 90º outlets of the water tubes point toward the
lower portion of the blade collars, aimed at the delivery ports, for
proper water delivery to the blade.
Fig. 8 — Water Tubes and the Blade Collar
Removing the Blade Guard
During use, the Blade Guard can become tight on the tapered mounting tab. To
loosen it, wiggle the Rear Blade Guard Handle up and down, while lifting with
the Top Handle.
Blade Collar
Water Tube aimed at
groove in Blade Collar
Water Tube bracket