Filter
Top Products
42
Belts and Pulleys
Belt Qty Part Number
Blade Shaft Drive Belt 2 Part # 520009
Jackshaft Belt 1 Part # 521012
Transaxle Drive Belt 1 Part# 521004
Water Pump Option Belts 1
Part# 521006
Part# 521008
Fig. 24 — Belt Locations
V-Belt Tension
Ideal V-Belt tension is the lowest tension at which the belt will not slip under
peak load conditions. Check V-Belt tension frequently during the first 24-48
hours of run-in operation.
CAUTION
§ Over-tensioning shortens belt and bearing life.
§ Keep belts clean of foreign material that may cause slippage.
§ Make V-Belt inspection a periodic procedure.
§ Never dress belts, as this can cause premature failure.
Belt Tensioner Pulley
Jackshaft
Blade Shaft
Belt
Jackshaft Belt
Transaxle
Drive Belt