Filter
Top Products
6.1.1 To connect using a pre-configured profile
The cellular router supports 4 connection profiles; these profiles allow you to configure the settings that the
router will use to connect to the cellular network.
First examine the list of configured profiles
Select the profile that you wish to connect to make sure that the APN name field is correct. This is very
important. The examples above shows the APN name to be “apnname1/apnname2/apnname3” as
examples but yours will be specific to your carrier.
Click Auto Connect Enable
Click Save
From now on, Auto Connect will keep remain enabled and the router will automatically connect unless you
come back to this page and disable it.
Revision 1.55 NetComm Limited
March 2009
23