Filter
Top Products
These items may be configured separately for each of the 4 connection profiles.
The following items may be configured using the “Modem” page:
Baud Rate
The serial (V.24) port baud rate. By default the serial line format is 8 data bits, No parity, 1 Stop bit.
See “NTCSeriesCellularRouterV250(AT)manual-V1-52” if you need to change the serial line format.
Inter Character Timeout
The PAD will buffer any bytes received from the serial port until either 512 bytes have been received or no
bytes have been received for “Inter Character Timeout” milliseconds, it will then send any bytes in
the buffer to the remote host.
ID
When the ID field is not blank (empty) the defined ID will be sent to the remote host as follows:
Revision 1.55 NetComm Limited
March 2009
43