Filter
Top Products
9
Leg Assembly:
Remove the four (4) Legs from the Saw Water Pan, and the four (4) Plastic Handle Knobs
and four (4) Square Nuts from the plastic bag. Place one (1) Square Nut into each of the
Nut Retaining Brackets located on each of the Leg Holders. Attach one (1) Plastic Knob to
each of the Square Nuts as shown in Figure 4: Plastic Knob Attachment. NOTE: Do not
tighten Plastic Knobs at this time. Place one (1) Leg into each of the Leg Holders and
tighten the Plastic Knobs see Figure 5: Leg Attachment.
Figure 4: Plastic Knob Attachment
Figure 5: Leg Attachment