Omega Engineering FP-6000 Stud Sensor User Manual


 
23
Specifications
General Data
Flow velocity range: 1.6 to 20 ft/s
0.5 to 6 m/s
Linearity: ±1% of full range
Repeatability: ±0.5% of full range
Pipe sizes:
Standard version: 1.5 to 24 in.
(38 to 610 mm)
Hot-Tap version: 1.5 to 36 in.
(38 to 914 mm)
Cable length: 25 ft (7.6 m), can extend
up to 200 ft (61 m)
without amplification
Materials
Sensor material: C36000 free cutting
brass
Rotor material: CD4MCu stainless steel
Rotor bearings: Fluoroloy B®
Rotor shaft: 316 stainless steel (opt.)
Tungsten Carbide (std.)
O-ring material: Viton®
Electrical Data
Power requirements: Self powered
Load impedance: 0 to 1000 max.
Ambient Conditions
Maximum