Filter
Top Products
36
36
5
5
ADVANCED FUNCTIONS
The following additional functions apply to models HHP-2080,
2081, 2082, 2083, 2084, 2085
ADVANCED FUNCTIONS
The following additional functions apply to models HHP-2080,
2081, 2082, 2083, 2084, 2085
RANGE LOCK
This instrument has a Range Lock feature that displays readings to
the best resolution, shown by / on the display. This can be
turned off by pressing the key. The display will then use the
same display resolution for the entire pressure range. Thisis useful
to stop the display switching between resolutions where there are
fluctuations in pressure. To cancel this mode, press the key
again.
AR
/
/
AR
AR
RANGE LOCK
This instrument has a Range Lock feature that displays readings to
the best resolution, shown by / on the display. This can be
turned off by pressing the key. The display will then use the
same display resolution for the entire pressure range. Thisis useful
to stop the display switching between resolutions where there are
fluctuations in pressure. To cancel this mode, press the key
again.
AR
/
/
AR
AR
NOTE: To reset MAX/MIN recorder function switch the instrument
off.
NOTE: Some functions may be inhibited while information is
stored in eitherAuto, Manual or Max/Min modes. This is to
prevent inadvertent parameter mixing whilst in any of the above
modes. To re-activate these functions please delete any stored
information by following the “Output of data” section.
NOTE: To reset MAX/MIN recorder function switch the instrument
off.
NOTE: Some functions may be inhibited while information is
stored in eitherAuto, Manual or Max/Min modes. This is to
prevent inadvertent parameter mixing whilst in any of the above
modes. To re-activate these functions please delete any stored
information by following the “Output of data” section.
SETTING INTERNAL CLOCK
NEPress d (•) key and the and symbols will appear
on display with the current year and month settings
Key in new year and month if desired and press key to accept.
Display will show current date of month setting (DD). Key in new
value if desired and press key to accept.
Display will show current hours and minutes setting (24 hour clock).
Key in new values if desired and press key to accept. Instrument
will then return to normal mode.
ecimal point
(YYMM).
SETTING INTERNAL CLOCK
NEPress d (•) key and the and symbols will appear
on display with the current year and month settings
Key in new year and month if desired and press key to accept.
Display will show current date of month setting (DD). Key in new
value if desired and press key to accept.
Display will show current hours and minutes setting (24 hour clock).
Key in new values if desired and press key to accept. Instrument
will then return to normal mode.
ecimal point
(YYMM).
LOGGING
These models have functions that enable the user to store and
retrieve up to 250 readings and output such to a PC or Epson
compatible printer via Omega’s infrared HHP-2000DL. Omegaalso
offers MLWIN, a customised Windows™ software package.
Note: Some functions may be inhibited while information is stored in
eitherAuto, Manual or Max/Min modes. Thisis to prevent
inadvertent parameter mixing whilst in any of the above modes.
To re-activate these functions please delete any stores information
by following the "Output of data" section.
LOGGING
These models have functions that enable the user to store and
retrieve up to 250 readings and output such to a PC or Epson
compatible printer via Omega’s infrared HHP-2000DL. Omegaalso
offers MLWIN, a customised Windows™ software package.
Note: Some functions may be inhibited while information is stored in
eitherAuto, Manual or Max/Min modes. Thisis to prevent
inadvertent parameter mixing whilst in any of the above modes.
To re-activate these functions please delete any stores information
by following the "Output of data" section.
LOGGING ON DEMAND
NE
0
This function allows readings to be stored as and when required.A
maximum of 50 readings can be stored this way.
When ready to store a reading press key. , symbols
and will appear on the display. It is possible to enter up to a four
digit reference number including decimal point. Press key to
enter and store reading, time, date and reference number.
Instrument will return to standard mode, however symbol will
remain on display until data is erased.
LOGGING ON DEMAND
NE
0
This function allows readings to be stored as and when required.A
maximum of 50 readings can be stored this way.
When ready to store a reading press key. , symbols
and will appear on the display. It is possible to enter up to a four
digit reference number including decimal point. Press key to
enter and store reading, time, date and reference number.
Instrument will return to standard mode, however symbol will
remain on display until data is erased.
PRESET INTERVAL LOGGING
This function allows readings to be taken automatically at a preset
time interval.
NOTE: If data is already stored, as signified by the or
symbols appearing on display, this function will not operate.
PRESET INTERVAL LOGGING
This function allows readings to be taken automatically at a preset
time interval.
NOTE: If data is already stored, as signified by the or
symbols appearing on display, this function will not operate.
OMEGAnet On-Line Service
http://www.omega.com
®
OMEGAnet On-Line Service
http://www.omega.com
®
Internet e-mail
info@omega.com
Internet e-mail
info@omega.com
Servicing North America:
Servicing North America:
For immediate technical or application assistance:
For immediate technical or application assistance:
Servicing Europe:
Servicing Europe:
USA:
ISO 9001 Certified
USA:
ISO 9001 Certified
Canada:
Canada:
USA and Canada:
USA and Canada:
Mexico and
Latin America:
Mexico and
Latin America:
Benelux:
Benelux:
Postbus 8034, 1180 LAAmstelveen, The Netherlands
Tel: (31) 20 6418405
Toll Free in benelux: 0 800 0993344
e-mail: nl@omega.com
Postbus 8034, 1180 LAAmstelveen, The Netherlands
Tel: (31) 20 6418405
Toll Free in benelux: 0 800 0993344
e-mail: nl@omega.com
Czech Republic:
Czech Republic:
France:
France:
Germany/Austria:
Germany/Austria:
United Kingdom:
ISO 9002 Certified
United Kingdom:
ISO 9002 Certified
One Omega Drive, River Bend Technology Centre,
Northbank, Irlam, Manchester M44 5EX, England
Tel: 44 (161) 777-7711
Toll Free in England: 0800-488-488
e-mail: info@omega.co.uk
One Omega Drive, River Bend Technology Centre,
Northbank, Irlam, Manchester M44 5EX, England
Tel: 44 (161) 777-7711
Toll Free in England: 0800-488-488
e-mail: info@omega.co.uk
Daimlerstrasse 26, D-85392 Deckenpfronn, Germany
Tel: 49 (07056) 3017
Toll Free in German: 0130 11 21 66
e-mail: info@omega.de
Daimlerstrasse 26, D-85392 Deckenpfronn, Germany
Tel: 49 (07056) 3017
Toll Free in German: 0130 11 21 66
e-mail: info@omega.de
9 rue Denis Papin, 78190 Trappes
Tel: (33) 130-621-400
Toll Free in France: 0800-4-06342
e-mail: france@omega.com
9 rue Denis Papin, 78190 Trappes
Tel: (33) 130-621-400
Toll Free in France: 0800-4-06342
e-mail: france@omega.com
ul. Rude armady 1868, 73301 Karvina-Hranice
Tel: 420 (69) 6311899
Toll Free: 0800-1-66342
ul. Rude armady 1868, 73301 Karvina-Hranice
Tel: 420 (69) 6311899
Toll Free: 0800-1-66342
Sales Service:1-800-826-6342 / 1-800-TC-OMEGA
Customer Service: 1-800-622-2378 / 1-800-622-BEST
Engineering Service: 1-800-872-9436/1-800-USA-WHEN
TELEX: 996404 EASYLINK: 62968934 CABLE:OMEGA
SM
SM
SM
Sales Service:1-800-826-6342 / 1-800-TC-OMEGA
Customer Service: 1-800-622-2378 / 1-800-622-BEST
Engineering Service: 1-800-872-9436/1-800-USA-WHEN
TELEX: 996404 EASYLINK: 62968934 CABLE:OMEGA
SM
SM
SM
Tel: (95) 800-826-6342
En Español: (95) 203-359-7803
Tel: (95) 800-826-6342
En Español: (95) 203-359-7803
FAX: (95) 203-359-89-8
Email: espanol@omega.com
FAX: (95) 203-359-89-8
Email: espanol@omega.com
FAX: (31) 20 6434643
FAX: (31) 20 6434643
FAX: 420 (69) 6311114
Email: czech@omega.com
FAX: 420 (69) 6311114
Email: czech@omega.com
FAX: (33) 130-699-120
FAX: (33) 130-699-120
FAX: 49 (07056) 8540
FAX: 49 (07056) 8540
FAX: 44 (161) 777-6622
FAX: 44 (161) 777-6622
976 Bergar
Laval (Quebec) H7L 5A2
Tel: (514) 856-6928
e-mail: info@omega.ca
976 Bergar
Laval (Quebec) H7L 5A2
Tel: (514) 856-6928
e-mail: info@omega.ca
One Omega Drive, Box 4047
Stamford, CT 06907-0047
Tel: (203) 359-1660
e-mail: infor@omega.ca
One Omega Drive, Box 4047
Stamford, CT 06907-0047
Tel: (203) 359-1660
e-mail: infor@omega.ca
FAX: (203) 359-7700
FAX: (203) 359-7700
FAX: (514) 856 6886
FAX: (514) 856 6886
®
®
omega.com
®
®
omega.com