Filter
Top Products
34
OutBack Power Systems Inc.
BACKLIGHT
AUTO (default) leaves backlight and soft keys on for
60 seconds whenever any soft key is pressed (press-
ing any soft key when the LCD is not lighted does not
change any settings).
ON or OFF states are also available.
Press the #1soft key twice to return to the MAIN
Menu screen
Press the <> soft key to move the asterisk to the
EQ option. When the asterisk is to the left of EQ, press
the <GO> soft key.
EQ—BATTERY EQUALIZE
The intent of an equalization charge is to bring all battery cells to an equal voltage. Sealed batter-
ies should not be equalized unless speci cally instructed by the manufacturer. Shut o or minimize
all AC and/or DC loads when equalizing and be sure the EQ voltage will not damage any DC load.
If possible, ensure the EQ cycle starts and stops the same day it is initiated or unnecessary battery
gassing can occur.
• Occasional equalization extends the life of ooded electrolyte batteries.
• Proceed with caution! A vent fan is recommended in enclosed spaces.
• The MX60 allows the user to set voltages and times of equalization process.
• Both manual and auto modes are available.
• EQ is not battery temperature compensated.
• Always check the electrolyte level in the batteries before and after equalizing.
BACKLIGHT CONTROL
ALWAYS
EXIT AUTO ON OFF
Charger Aux *Light
EQ Misc Optimize
Logging Log2
EXIT GO