Filter
Top Products
59
OutBack Power Systems Inc.
In the STATUS screen, press the #3 and #4 soft keys
simultaneously to perform a Mini-Sweep. The MX60
will track the new MPP based on the xed percent-
age value. Perform a Mini-Sweep any time a change
to the input system or the Park Mpp xed percent-
age value is changed. In U-Pick %Voc mode, press the
#3 and #4 soft keys and the New Voc is displayed; in
Auto Sweep mode, press the #3 and #4 soft keys until
Sweeping is displayed.
A user might want an MPP that falls outside of the xed percentages available in Park Mpp. With
the MX60, a user can manually adjust these values by single percentage points while observing a
change in the instantaneous watts made available with these adjustments.
To manually track and change the MPP voltage in either the Auto Sweep or U-Pick %Voc
MPPT Modes:
Press and hold the #3 soft key to decrease the power
point voltage (PV voltage). Press and hold the #4 soft
key to increase the power point voltage (PV voltage).
Observe the changes in the Watts value to determine
whether increasing or decreasing the PV voltage will
improve the available power to the system.
Press either soft key to adjust
PV voltage
PV 087 V Bat 12.0 V
05.0 A 35.8A
Watts 0430 Aux Off
kWHrs 00.0 B-MPPT
PV 087 V Bat 12.0 V
05.0 A 35.8A
Watts 0430 Aux Off
kWHrs 00.0 B-MPPT