Filter
Top Products
19
CR-W402UA
Caution
¡
We strongly recommend that you wear gloves for installation work to protect yourself from injurie
s.
¡
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers.
First complete the electrical connections, and then check them for correctness.(a page 20)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
q
Insert the Mounting Collar q into the
dashboard, and bend the mounting tabs
out with a screwdriver.
The tabs to be bent vary depending on
the vehicle. To securely install the
unit, fully bend a number of the tabs
so that there is no rattling.
Example:
Tab
q Mounting
Collar
Power Connector
Mounting Holes
Mounting Bolt
Mounting springs (C)
w
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the
unit to the vehicle body by either method (a) or (b)
shown in the previous page.
e
After installation reconnect the negative (–)
battery terminal.
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar q
firmly.
Mounting Spring
Mounting
Holes
❐ To Remove the Unit from the vehicle’s dashboard
Insert each Removal Tool i and pull.
i Removal Tool
(U-shaped)
Note: Do not lose Removal Tools. They will be needed
to remove the unit from the vehicle’s dashboard.