Panasonic EY6932 Cordless Drill User Manual


 
-
4
-
8) During charging, the charger
may become slightly warm. This
is normal. Do not charge the bat-
tery for a long period.
Symbol meaning
V Volts
Direct Current
n
0
no load speed
…/min
revolutions or
reciprocation per minutes
Forward Rotation
Reverse Rotation
Rotation with Hammering
Rotation only
WARNING;
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities con-
tains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals
are:
* Lead from lead-based paints
* Crystalline silica from bricks and
cement and other masonry prod-
ucts
* Arsenic and chromium from chemi-
cally-treated lumber.
To reduce your exposure to these
chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as dust masks that
are specially designed to filter our
microscopic particles.
. FOR BATTERY
CHARGER &
BATTERY PACK
1)
SAVE THESE
INSTRUCTIONS
This manual contains important
safety and operating instructions
for battery charger EY0230.
2) Before using battery charger, read all
instructions and cautionary markings
on (1) battery charger, (2) battery
pack.
3)
CAUTION
To reduce the risk of injury, charge
only Battery Pack as shown below.
EY9065, EY9066, EY9080, EY9086,
EY9180, EY9182, EY9001, EY9006,
EY9101, EY9106, EY9107, EY9200,
EY9201, EY9136, EY9230, EY9231
Other types of batteries may burst
causing personal injury and dam-
age.
4) Do not expose charger to rain or
snow.
5) To reduce risk of damaging the
electric plug and cord, pull by plug
rather than cord when disconnect-
ing charger.
6) Make sure cord is located so that it
will not be stepped on, tripped over,
or otherwise subjected to damage
or stress.