Filter
Top Products
-
6
-
. FUNCTIONAL DESCRIPTION
Clutch handle
Keyless drill chuck
Variable speed control trigger
15.6V Battery pack (EY9231)
Speed selector switch
Vent holes
Forward/Reverse lever
Battery pack release button
Battery charger (EY0230)
. ASSEMBLY
Attaching or removing bit
Note: When attaching or removing
a bit, disconnect battery pack
from tool or place the switch in
the center position (switch lock).
This tool is equipped with a keyless
drill chuck.
1. Attachment
Insert the bit and turn the Lock col-
lar clockwise (looking from the front)
to tighten firmly.
Slide the Lock collar to LOCK side
until it snaps.
Lock collar
LOCK
2. Removal
Slide the Lock collar to FREE side.
Turn the Lock collar counterclock-
wise (looking from the front), then
remove the bit.
Lock collar
FREE
Note: If excessive play occurs in the
chuck, secure the drill in place
and tighten the chuck by turning
clockwise, open the chuck jaws
by unscrewing the Lock collar and
tighten the screw (left-handed
screw) with a screwdriver by turn-
ing it counterclockwise (viewed
from the front).