Filter
Top Products
10 VQT3A10
Preparation
Battery supply
∫ About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBJ10.
1 Open the card/battery door and insert the battery in
the direction shown in the figure.
≥ Push the centre of the battery in the direction of the # until it
“clicks” and locks.
2 Close the card/battery door.
∫ Removing the battery
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
≥ Turn off the unit and make sure the LCD
monitor is turned off. Then remove the
battery while supporting the unit to prevent
it dropping.
It has been found that counterfeit battery packs which look very
similar to the genuine product are made available to purchase in
some markets. Some of these battery packs are not adequately
protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised
that we are not liable for any accident or failure occurring as a
result of use of a counterfeit battery pack. To ensure that safe
products are used we would recommend that a genuine
Panasonic battery pack is used.
Inserting/removing the battery
HM-TA1EP_EB_GC-VQT3A10_mst.book 10 ページ ２０１０年７月１４日 水曜日 午後５時５分