Filter
Top Products
12 Option and spare parts list
56
Warning
WarningWarning
Warning
12.2 How to replace the lens unit
１）Rotate the lens unit to attach it to the LED head.
(Tightening torque: 0.2 Nm)
２）Stick on the included seal to prevent looseness.
・When attaching a lens unit, take care to prevent any dirt or other foreign substance from
getting inside.
・Do not touch the lens with bare hands. If you touch the lens or if the lens becomes dirty,
clean the lens by wiping with a soft cloth dipped in alcohol.
12.3 Fitting the mounting bracket
１）Insert the LED head into the mounting bracket.
２）Tighten the 2 torque screws to fix the LED head.
(Tightening torque: 1 Nm)
LED head
M3
Mounting
bracket