OEM Catalogue 2009/20103.128
HID-Basic BSN/BMH semi-parallel ignitor
BSN
Product Description
●
Impregnated electromagnetic copper/iron gears for use with an
external semi parallel ignitor for CDM, CDO, MH, HPI (Plus) and
SON lamps
Features and Benefits
●
Compact dimensions and light weight with minimal watt losses,
thanks to orthocyclic winding process
●
Control gear can be installed remotely; substantial distance allowed
between gear/ignitor & lamp
●
Equipped as standard with screw terminal blocks; insert contact on
request
●
Earthing-while-mounting facility
●
Gear can also be used in combination with series (superimposed)
ignitor
●
Versions with ThermoSwitch available for protection against end- of
-lamp- life phenomena (TS mandatory for operation of CDM lamps).
Applications
●
Ideal for the following applications:
○
Recreational sports lighting, indoor and outdoor
○
Road and residential lighting
○
Floodlighting of buildings and monuments
○
Area lighting, e.g. harbors, building sites
○
Canopy lighting, e.g. petrol stations
○
Horticulture
●
Climatic suitability: restricted to built-in situations where relative
humidity is limited
Quality
Philips Quality assures optimum quality regarding:
●
System supplier: As manufacturers of lamps and electromagnetic
control gear, Philips ensures that, from the earliest development
stage, optimum lamp/gear performance is maintained.
●
European standards: Philips HID electromagnetic gears comply with
all relevant international rules and regulations.
Compliances and approvals
Safety EN 61347-2-9
Performance EN 60923
RFI EN 55015
Harmonics EN 61000-3-2
EMC immunity EN 61547
Approval marking ENEC
CE-marking
Environmental standard ISO 14001
Recommended lamp page 3.170
www.philips.com/OEM