Filter
Top Products
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PRT-150
07
Safety instructions
The following symbols are used in these instructions:
Read instructions carefully.
Conformity with the relevant EU safety.
Danger of life and risk of injury as well as risk of damage to the
machine in case of non-adherence to the safety instructions in
these instructions of use.
Danger of electric shock.
Remove the plug from the mains socket.
Danger! Keep hands away from moving parts.
Wear ear protection.
Wear safety goggles.
Wear a protection mask.
General safety instr
uctions
Caution! Read all instructions. The non-observation of the instructions
mentioned below may cause an electric shock, fire and/or severe injuries. The
term “electric tool” mentioned below refers to mains-operated electric tools
(with power cord) and to rechargeable electric tools (without power cord).
Keep these instructions for use in a safe place.
1) Workplace
(a) Keep your workplace clean and tidy. Untidy and badly illuminated work
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PRT-150
18
Assembly
sized blocks of wood or similar supportable items. (Fig. 14)
• Place the router in position on the underside of the table as central as
possible. Insert two coach bolts into holes marked “C” (Fig. 4) from the
table top, now underneath (Fig. 15).
• Loosely secure router in position with the 4 bolts (Fig. 16). It may be
necessary to rotate the router in order to locate all 4 bolts correctly. If
router is fitted with a speed control, try if possible to position the speed
control where it can easily be accessed from the front of the table. Once
the router is in the desired position, tighten the 4 bolts sufficiently to
prevent the router moving whilst in operation.
• Plug the router plug into the receptacle of the switch box.
This router table only can fit routers with up to 155mm diameter base
plate.
• Your router table is now fully assembled and ready for use.