Filter
Top Products
4
17. REMOVE FINGER FROM TRIGGER
when not driving fasteners. Never carry tool
with finger on trigger. Fig. 10.
18. DON’T OVERREACH. Keep proper
footing and balance at all times when using
or handling the tool.
19. FIRE FASTENERS INTO WORK
SURFACE ONLY: never into materials too
hard to penetrate. Fig. 11.
20. GRIP TOOL FIRMLY TO MAINTAIN
CONTROL WHILE allowing tool to recoil
away from work surface as fastener is
driven.
21. DO NOT DRIVE FASTENERS on top of
other fasteners, or with the tool at too steep
an angle: the fasteners can ricochet causing
personal injury. Fig. 11.
22. DO NOT DRIVE FASTENERS CLOSE
to the edge of the workpiece. The
workpiece is likely to split allowing the
fastener to fly free or ricochet causing
personal injury. Fig. 12.
23. KEEP HANDS AND BODY PARTS
away from area shown in Fig. 13A, to avoid
injury.
Fig. 10
Fig. 11
Fig. 12
Fig. 13A
901891 - 08-31-01.qxd 2/13/02 11:52 AM Page 4