Filter
Top Products
22 - ENGD23269
PROBLEM
CAUSE
CORRECTION
Clean or replace. See Air Filter
paragraph in the Maintenance
section.
Dirty air filter.
Restricted air intake
Excessive belt
wear
Loose belt.
Loosen wingnut and then tighten
wingnut until it contacts the
washer, plus one turn.
Tight belt.
Loosen wingnut and then tighten
wingnut until it contacts the
washer, plus one turn.
Loose pulley.
Have checked by a Trained
Service Technician.
Pulley misalignment.
See Motor Pulley/Flywheel
Alignment paragraph in the
Maintenace section.
Squealing sound.
Loose belt.
Loosen wingnut and then tighten
wingnut until it contacts the
washer, plus one turn.
Compressor pump has
no oil.
See Oil-Checking paragraph in
the Maintenace section.