Filter
Top Products
32
Trouble Probable Cause Remedy
Miswiring of the unit.
Double check to confirm all electrical
connections are correct. Refer to
appropriate wiring diagrams on pages
54 through 57 to make any needed
corrections.
Machine will not
start/restart or
repeatedly trips
circuit breaker or
blows fuses.
Switch failure.
If the start/stop switch is suspect, you
have two options: Have a qualified
electrician test the switch for function,
or purchase a new start/stopswitch
and establish if that was the problem
on changeout.
Extension cord too light or too long.
Replace with adequate size and
length cord.
Band Saw does not
come up to speed.
Low current. Contact a qualified electrician.
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848 between 7:30 a.m. and 6:00 p.m. (CST), Monday through Friday. Having the Model
Number and Serial Number of your machine available when you call will allow us to serve you quickly and
accurately.