Filter
Top Products
6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and maintenance
procedures for a Powermatic Model DS20 Disc Sander. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has
been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your local
supplier or Walter Meier. Walter Meier can also be reached at our web site: www.waltermeier.com.
Specifications
Model Number .................................................................................... DS20 ................................................. DS-20
Stock Number ............................................................................... 1791276 ............................................. 1791264
Motor and Electricals:
Horsepower ...................................................................................... 2HP .................................................... 3HP
Phase .............................................................................................. single ......................................................... 3
Voltage ..................................................................................... 230V only ................. 230/460V (prewired 230V)
Frequency ........................................................................................ 60Hz ................................................... 60Hz
FLA (full load amperage) .................................................................. 14 A ............................................. 9.8/4.9 A
Motor speed (RPM) ......................................................................... 1720 ................................................... 1720
Recommended circuit* ...................................................................... 30 A ............................................... 20/15 A
* subject to local and national electrical codes
Disc:
Disc Diameter (in.) ............................................................................... 20 ....................................................... 20
Disc Speed (RPM) ........................................................................... 1720 ................................................... 1720
Table:
Table Tilt (deg.) ................................................................ 30 up, 45 down .................................. 30 up, 45 down
Table Size (in.) ................................................................. 27-1/2 x 10-1/2 ................................... 27-1/2 x 10-1/2
Table Surface from Floor, minimum height (in.) .......................... 28-3/16 ............................................... 28-3/16
Table Surface from Floor, maximum height (in.) ........................... 35-7/8 ................................................. 35-7/8
Distance Between Disc and Table (in.) ............................................. 0.20 .................................................... 0.20
Distance Between Mounted Abrasive and Table (in.) ....................... 0.17 .................................................... 0.17
Dust Collection:
Dust Port Diameter (in.) ......................................................................... 4 ......................................................... 4
Dust Collection Minimum CFM Required ........................................... 600 ..................................................... 600
Dimensions and Weights:
Overall Size (LxWxH)(in.) ............................................... 31 x 28 x 48-1/2 ................................. 31 x 28 x 48-1/2
Footprint (LxW)(in.) .......................................................... 22-1/2 x 22-1/2 ................................... 22-1/2 x 22-1/2
Net Weight, approximate (lbs.) .......................................................... 426 ..................................................... 426
Shipping Weight, approximate (lbs.) .................................................. 529 ..................................................... 529
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without prior
notice, without incurring obligations.