Filter
Top Products
6
Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a
Model PF-BS Stock Feeder and Fence for Band Saws. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance to instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Description
The PF-BS Stock Feeder is designed for mounting to a band saw table 24” or larger in width. This heavy
duty Stock Feeder has a cast iron frame, and is ideal for plank splitting and under-bark trimming. The
serrated steel rollers provide a positive grip on the workpiece, and the tension against the workpiece can
be quickly and simply adjusted by turning a hex nut. The adjustable feed rate covers a range of eight
speeds.
Specifications
Model Number................................................................................................................................ PF-BS
Stock Number – 1 Ph, 230V......................................................................................................... 1790819
Stock Number – 3 Ph, 230V......................................................................................................... 1790820
Stock Number – 3 Ph, 460V......................................................................................................... 1790821
Fence:
Width (in.)..................................................................................................................................12-1/2
Height (in.).........................................................................................................................................8
Feeder:
Width (in.)..................................................................................................................................21-1/2
Height (in.).................................................................................................................................11-3/4
Length with Handle Installed (in.).....................................................................................................40
Column Diameter (in.)......................................................................................................................... 2.28
Rollers (Dia. x W)(in.).................................................................................................................. 7 x 1-1/2
Motor ................................................................................................................TEFC, 1/2HP, 1Ph or 3Ph
Rotation.................................................................................................................................Forward only
Number of Speeds...................................................................................................................................8
Speed Range (FPM)...........................................................................................10-17-20-27-33-45-57-93
Workpiece Thickness Allowed (in.)........................................................................................................7.1
Swing (deg.) ..........................................................................................................................................30
Fence Horizontal Movement (in.) .............................................................................................................4
Approximate Net Weight (lbs.) .............................................................................................................177
Approximate Shipping Weight (lbs.) .....................................................................................................211
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.