Filter
Top Products
The Acute2 ring is an entirely mobile source of light. The
interior diameter of 100mm provides plenty of space for pro-
fessional camera lenses. Since the camera holder can be tilted
forward and backwards, as well as upwards and downwards,
most cameras can be attached. The Acute 2 ring gives a
shadowless light and it makes an excellent source of light in
cramped areas, such as the interior of an automobile. Many
fashion photographers also use the Acute 2 ring to find new
angles and capture details. The ring flash provides a very
distinct, directed light, but can be complemented by a soft light
reflector, which increases the light source, thereby producing a
soft light with little shadow.
For close-ups, there is a reflector that focuses the light 50 cm
in front of the camera lens.
The maximum charge is 9600 Ws/minute. This means 4 flashes
a minute at 2400 Ws, 8 flashes at 1200 Ws, 16 flashes at
600 Ws, etc.
Changing flash tube is only to be done at a professional
service station.
Mounting the reflector:
•Remove the two ridged screws fixating the camera holder.
•Remove the four ridged nuts holding the outer and inner
reflectors together.
•Run the lamp cable through the outer reflector and let the
reflector slide into position.
•Reassemble the outer and inner reflectors using the ridged
nuts.
•Reassemble the camera holder using the two ridged
screws.
Acute2 ring
13
10 06 42 Softlight Reflector Ring
10 06 43 Close-Up Reflector Ring