Filter
Top Products
25
101274
IMPORTANT
• Recommended for use with Remington
®
powder loads and
power fasteners.
• Do not use power fasteners longer than 2
1
/
2
" or power
washer fasteners longer than 3".
• If power fastener goes below the top surface of the board,
use penetrating control disc (see illustration below) or
washered SPW-type fasteners.
• Always wear approved eye and ear protection.
*
Use power fastener with penetration control disc, part number
015549.
Load Color Code
Stock Level Load Case
Number Number Strength Body Head
A22C1 1 light brass Gray
A22C2 2 medium brass Brown
A22C3 3 heavy brass Green
A22C4 4 extra heavy brass Yellow
.22 CALIBER Type A neck-down crimp loads for powder
actuated tools
482-85
Application Chart