Filter
Top Products
9
101274
WATER
489-33
30
489-
3. ALWAYS use the spall shield when driving directly into
concrete or steel. ALWAYS wear eye protection.
4. NEVER use a powder actuated tool in an explosive or
flammable atmosphere or when non sparking tools
are required.
POWDER LOADS AND FASTENERS
1. NEVER leave unfired powder loads on floors or
work surfaces.
2. Should the tool fail to fire, hold the muzzle firmly against
the work surface for 30 seconds. Release the trigger and
remove pressure on the tool while holding the muzzle
against the work surface. Again press the tool firmly
against the work surface and pull the trigger. If the tool still
fails to fire, hold the tool firmly against the work surface for
another 30 seconds before unloading and carefully dis-
carding the misfired powder load into water or oil.
Safety Precautions
G 018
Spall
Shield
482-49
G 018
POWDER
LOADS
482-51
G 018
POWDER
LOADS
G 018
GASOLINE
GAS
OLINE
482-50
G 018
Continued