Filter
Top Products
14
101437
Operation
1. Grasp muzzle and slide barrel forward rapidly until it stops. This sets piston into firing position
and opens the chamber.
4. Push barrel into housing to the closed position.
3. Select the proper Remington Power Load and insert into the chamber until it stops (see
Application Chart
on page 23).
482-70
2. Insert power fastener into muzzle of tool, head end first. Push the fastener until point is even
with end of tool. ALWAYS load the fastener first, then the power load.
482-71
NOTE:
Failure to start with
the lowest power
level can result in
overdrive condition
and will result in
damage to tool
(see page 13).
482-71
482-72