Filter
Top Products
9
101437
POWER
LOADS
POWER
LOADS
482-49
GASOLINE
GAS
OLINE
482-50
G 018
G 018
G 018
G 018
Safety Precautions
2. Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds.
Release the trigger and remove pressure on the tool while holding the muzzle against the
work surface. Again press the tool firmly against the work surface and pull the trigger. If the
tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before
unloading and carefully discarding the misfired power load into water or oil.
POWER LOADS AND FASTENERS
1. NEVER leave unfired power loads on floors or work surfaces.
4. NEVER use a powder actuated tool in an explosive or flammable atmosphere or when non-
sparking tools are required.
3. ALWAYS use the spall shield when driving directly into concrete or steel. Always wear
approved goggles.
WATER
482-46
G 018