Filter
Top Products
Page 3
Safe operation of this accessory requires that you read and
understand this operator's manual, the operator’s manual for
the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
■ KNOW YOUR ACCESSORY. Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
■ KEEP THE WORK AREA CLEAN. Cluttered work areas
and work benches invite accidents. DO NOT leave tools
or pieces of wood on the saw while operating.
■ ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-resis-
tant lenses; they are NOT safety glasses.
■ DO NOT USE THIS PRODUCT WITH OTHER EQUIP-
MENT OR FOR OTHER PURPOSES.
■ ALWAYS DISCONNECT THE SAW FROM THE POWER
SUPPLY BEFORE ASSEMBLING THIS KIT. Make sure
the switch is off when reconnecting the saw to a power
supply.
■ BEFORE MAKING A CUT, BE SURE ALL ADJUST-
MENTS ARE SECURE.
■ DO NOT USE AWKWARD HAND POSITIONS.
■ KEEP FINGERS away from the cutter; use fixtures when
necessary.
■ ALWAYS USE THE DUST COVER for overhead guard-
ing.
■ DO NOT REMOVE JAMMED CUT OFF PIECES UNTIL
the switch is off, the cutter has stopped, and the tool has
been disconnected from the power source.
■ HOLD WORKPIECE FIRMLY AGAINST THE TABLE.
■ UNUSED SAW MAY CAUSE PERSONAL INJURY. Dis-
connect the motor cord from the receptacle on your saw
and plug the router power cord into the receptacle.
Always use the saw's master switch to turn the router ON
and OFF.
■ NEVER USE A ROUTER BIT larger in diameter than the
opening in the router mounting plate.
■ DO NOT MAKE ADJUSTMENTS until the switch is off,
the cutter has come to a complete stop, and the tool has
been disconnected from the power source.
■ FEED WORKPIECE AGAINST ROTATION OF THE
CUTTER.
■ SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
RULES FOR SAFE OPERATION