2 3
RULES FOR SAFE OPERATION
Safe operation of this accessory requires that you read and
understand this operator’s manual, the operator’s manual for
the table saw and all labels affixed to the tool.
READ ALL INSTRUCTIONS
n Know your accessory. Read the operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
accessory.
n Keep the work area clean. Cluttered work areas and
work benches invite accidents.
n Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses. They
are NOT safety glasses.
n This stand will accommodate many miter saws. How-
ever, it should never be used on any miter saw with a
blade diameter larger than 12 in. or with any slide miter
saw with a blade diameter larger than 10 in. Always
confirm any miter saw used is mounted securely and is
stable before plugging in the miter saw. Before turning
on the saw, perform a dry run of the cutting operation
just to make sure that no problems will occur when
the cut is made.
n Do not modify or use this stand for any purpose for
which it is not intended.
n This stand is designed to be used on a flat stable
surface. Do not use the stand on an uneven surface.
Be sure to allow enough room to handle and properly
support the workpiece.
n Follow the tool mounting instructions carefully, and
ensure the tool is fastened securely.
n �Maximum weight of the miter saw and workpiece
together must not exceed 400 pounds.
n Do not apply an unbalanced load that could cause the
miter saw stand to tip over.
n Save these instructions. Refer to them frequently and
use them to instruct others who may use this accessory.
If you loan someone this accessory, loan them these in-
structions also to prevent misuse of the product and
possible injury.
n Rules for Safe Operation ................................................................................................................................................. 2
n Symbols........................................................................................................................................................................3-4
n Features........................................................................................................................................................................... 4
�n Assembly......................................................................................................................................................................5-9
�n Operation....................................................................................................................................................................9-11
�n Maintenance.................................................................................................................................................................. 12
TABLE OF CONTENTS
WARNING:
This stand is designed for use with miter saws with a blade diameter not larger than 12 in., or a slide miter saw with a
blade diameter not larger than 10 in.