Filter
Top Products
Page 19
OPERATION
TO EXTEND THE SAW TABLE
See Figure 17.
The saw table can be extended to increase the work surface.
To lengthen the saw table:
n Loosen the table lock knob underneath the saw table by
turning counterclockwise.
n Using the extension scale on the saw table, extend the
saw table to the desired position.
n Lock the saw table in place by turning the table lock knob
clockwise.
USING THE MITER GAUGE
See Figures 18 - 19.
The miter gauge can be turned 60° to the right or left.
n Loosen the lock knob on the miter gauge.
n With the miter gauge in the miter gauge slot, rotate the
gauge until the desired angle is reached on the index
scale.
n Retighten the lock knob.
NOTE: For convenience, store the miter gauge in the slot
on the back of the band saw.
SLOT
MITER
GAUGE
LOCK
KNOB
MITER
GAUGE
MITER
GAUGE
SLOT
SAW
TABLE
EXTENSION
SCALE
TABLE
LOCK
KNOB
Fig. 17
Fig. 18
Fig. 19